Membuat Perintah Routers Pada Packet Tracer - @ardihassi

Hot

Post Top Ad

Your Ad Spot

Tuesday, 6 December 2011

Membuat Perintah Routers Pada Packet Tracer




1.    Drag Routers 


KAMPUS. A
·      Beri perintah sebagai Berikut :
Router>enable
Router#configure t
Enter configuration commands, one per line.  End with CNTL/Z.
Cara mengubah Host name
Router(config)#hostname Kampus_A
Memberi password
Kampus_A(config)#enable password 1111
Memberi Catatan
Kampus_A(config)#banner motd +
Enter TEXT message.  End with the character '+'.


===============================================
|                             Welcome in KAMPUS_A                             |
|                                      [Ardiansyah]                                         |
|    @@@@                                                                @@@@  |
===============================================
+
·      Membuat IP pada Routers
Kampus_A(config)#interface serial 0/0/0
Kampus_A(config-if)#ip address 192.168.1.1 255.255.255.0
Kampus_A(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

·      Routers Selanjutnya  Sama Juga Perintahnya Dengan routers Yang Diatas
KAMPUS. B
Router>enable
Router#configure t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname Kampus_B
Kampus_B(config)#enable password 2222
Kampus_B(config)#banner motd +
Enter TEXT message.  End with the character '+'.

===============================================
|                             Welcome in KAMPUS_B                             |
|                                      [Ardiansyah]                                         |
|    @@@@                                                                @@@@  |
===============================================
+

Kampus_B(config)#interface serial 0/0/0
Kampus_B(config-if)#ip address 192.168.1.2 255.255.255.0
Kampus_B(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

·         Untuk mengkoneksikan Route ke route Ikuti langkah berikut :


Kampus_A(config)#interface serial 0/0/0
Kampus_A(config-if)#clock rate 64000
Kampus_A(config-if)#exit
Kampus_A(config)#line vty 0 4
Kampus_A(config-line)#password 1234
Kampus_A(config-line)#login
Kampus_A(config-line)#exit
Kampus_A(config)#exit
%SYS-5-CONFIG_I: Configured from console by console

·         Masukan IP KAMPUS_B
Kampus_A#telnet 192.168.1.2
Trying 192.168.1.2 ...

================================================
|                              Welcome In KAMPUS_B                                     |
|                                        [Ardiansyah]                                                |     
|  @@@@                                                                          @@@@ |
================================================


User Access Verification



Password:
Kampus_B>
·         Pada password di atas masukkan Password Line vty 0 4 KAMPUS_B yang telah dibuat



No comments:

Post a Comment

Post Top Ad

Your Ad Spot